Ecotex® Screen Printing Emulsion Remover
Published By Screen_Print_Dierct
- LocationUnited States
- StatusIn stock
- TypeNew
Key Benefits:
*Breaks Down Any/All Emulsion QUICK
*Biodegradable & Drain Safe
*Safe For Mesh
*Non-Hazardous
*Ready to Use or can be diluted 1:4 with water
Ecotex® Screen Printing Emulsion Remover by Screen Print Direct® is a powerful emulsion stripper helping increase your speed of reclaiming and screen cleaning. After applying this to the screen it will begin to dissolve your emulsion allowing for an easy reclaim process. It will liquefy your screen almost instantaneously. Non-hazardous, safe for all mesh types, our emulsion stripper is a solution for you. Quart and Pint include spray nozzle.
Shelf Life:
+12 months
For best results follow the steps below.
1. Once you have removed ink from the screen, apply our emulsion remover to both sides of a wet screen. leave for 15-30 seconds.
DISCLAIMER: If left on longer than the recommended time emulsion can lock permanently on the screen.
2. Rub your screen with a brush or a non-abrasive scrub pad to make sure emulsion remover is spread evenly over the coated area.
3. Use a high-pressure washer and begin washing your screen from the bottom and work your way upward.
You can use Emulsion Remover as is for tough stencils, or you can also dilute it up to 1:4 with water for stripping of easier stencils.
Shop Now- https://screenprintdirect.com/....collections/screen-p
