Ecotex® Screen Printing Water Based Chemistry Kit
Publicerad Förbi Screen_Print_Dierct
- Plats7231 Boulder Ave. Ste 518 Highland, CA 92346
- StatusI lager
- TypNy
Includes: <br>Water-Based Press Wash <br>Hyper Haze 2 N 1 Degreaser and Dehazer <br>Emulsion Remover <br>Premium Hand Cleaner <br>Scrub Pad <br>Spray Nozzles <br>Ecotex® Screen Printing Water-Based Chemistry Kit by Screen Print Direct® is an essential kit for water-based ink screen printing. Easy to use and the perfect kit to help get you started. Ecotex® screen reclaiming kit is the perfect kit with everything you need when it comes to reclaiming screens. Cleaning screen printing screens has never been easier with water-based ink cleaners and emulsion remover. Our kit includes 1 pint of Water-Based Press Wash, 1 pint of Hyper Haze, 1 pint of Emulsion Remover, 4 oz. of Premium Hand Cleaner for silk screen cleaner, and 2 spray nozzles. <br> <br>Ecotex® Water-Based Press Wash <br>Citrus Based environmentally friendly Screen Wash / Press Wash. Use it at the sink or on the press, designed specifically to quickly dissolve Water-Based inks. This product is ready to use, emulsion, and capillary stencil safe. <br>Ecotex® Hyper Haze <br>Economically and safely remove stains from all types of mesh better than other hazardous paste stain removers. Contains proprietary mesh protectors and micro-particles that will prepare new mesh for production. <br>To learn more about this product check out our blog post - To Degrease or Not Degrease <br> <br>Ecotex® Screen Printing Emulsion Remover <br>This product is ready to use or it can be diluted 1:4 with water. Ecotex® Emulsion Remover will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching. Reclaiming emulsion is easy. <br> <br>Ecotex® Premium Hand Cleaner <br>Inks, Grease, Much More are no match for our hand cleaner. Our organic-based, non-toxic hand cleaner was designed to be used with or without water. This product does not leave your hands dry or with an annoying sticky film after using it. <br> <br>For best results follow the steps below: <br>1. Start by using Ap 2-in-1 to degrease and clean any contaminants from the mesh. <br>2. When finished printing card excess ink away and use press wash to clean the ink off the screen. <br>3. To reclaim your screen spray Emulsion Remover to both sides of your screen and it will strip off once rinsed with high-pressure water. <br> <br>Disclaimer: Do not let emulsion remover sit on the screen for more than 30 seconds or it can lock emulsion on the mesh. <br> <br>Quick Tip: <br>For more information regarding each specific product please refer to the individual product listing <br>Shop Now: https://screenprintdirect.com/....collections/screen-p
